Om Automation

IES-150B is an unmanaged Ethernet switch with 5x10/100Base-T(X) ports. With very mini size of housing, you can install IES-150B easily. In addition, IES-150B is with rigid IP-30 housing design and can operate under harsh environment. The extended operating temperature range from -40 to 75°C is ready and can satisfy most requirement of operation.

• • Supports 5 ports 10/100 Base-T(X)
   
  • Supports auto-negotiation and auto-MDI/MDI-X
   
  • Supports store-and-forward transmission
   
  • Supports flow control
   
  • Compact size for easily installation
   
  • Rigid IP-30 housing design
   
  • DIN-Rail and wall mounting enabled

IGS-C1050 series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000Base-T(X) ports . In addition, the wide operating temperature range from -40°C to 75°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for Ethernet application.

• • Supports 5 x 10/100/1000Base-T(X) ports 
   
  • Compact size for easy installation
   
  • QoS supported to process critical data in heavy traffic
   
  • IP40 protection class
   
  • -40 to 75°C wide operating temperature range
   
  • DIN-Rail mounting enabled

• ETH

  5 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover

• IEEE 802.3 series standards

  802.3i, 802.3u, 802.3ab, 802.3x, 802.3az

• Bandwidth (Non-blocking)

  10 Gbps

• Packer buffer

  128 KB

• MAC address table size

  2K entries

• Jumbo frame support

  9216 bytes

• Connector

  2-pin industrial DC power socket

• Input voltage range

  9 – 30 VDC

• PoE (passive)

  Possibility to power up through ETH1 ports, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC

• Power consumption

  Idle: 0.3 W / Max: 2.3 W

• Ethernet

  5 x RJ45 ports, 10/100/1000 Mbps

• Status LEDs

  1 x Power LED, 10 x ETH status LEDs

• Power

  1 x 2-pin industrial DC power socket

• Other

  1 x Grounding screw

• Casing material

  Anodized aluminum housing and panels

• Dimensions (W x H x D)

  113.1 x 27.4 x 80.5 mm

• Weight

  174 g

• Mounting options

  Integrated DIN rail bracket, wall mount, flat surface (additional kit needed)

• Operating temperature

  -40 °C to 75 °C

• Operating humidity

  5% to 95% non-condensing

• Ingress Protection Rating

  IP30

• Regulatory

  CE, UKCA, FCC, IC, CB, RCM, CITC, REACH, RoHS, WEEE

• Standards

  EN 55032:2015 + A11:2020 + A1:2020

  EN 55035:2017 + A11:2020

• ESD

  EN 61000-4-2:2009

• Radiated Immunity

  EN IEC 61000-4-3:2020

• EFT

  EN 61000-4-4:2012

• Surge Immunity (AC Mains Power Port)

  EN 61000-4-5:2014 + A1:2017

• CS

  EN 61000-4-6:2014

• Standards

  CE: EN IEC 62368-1:2020 + A11:2020

  RCM: AS/NZS 62368.1:2022

  CB: IEC 62368-1:2018

• WAN

  1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

• LAN

  3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

• Routing

  Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

• Network protocols

  TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN

• VoIP passthrough support

  H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

• Connection monitoring

  Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

• Firewall

  Port forward, traffic rules, custom rules, TTL target customisation

• Firewall status page

  View all your Firewall statistics, rules, and rule counters

• Ports management

  View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

• Network topology

  Visual representation of your network, showing which devices are connected to which other devices

• DHCP

  Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

• QoS / Smart Queue Management (SQM)

  Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

• DDNS

  Supported >25 service providers, others can be configured manually

• DNS over HTTPS

  DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS

• Network backup

  VRRP, Wired options, each of which can be used as an automatic Failover

• Load balancing

  Balance Internet traffic over multiple WAN connections

• Hotspot

  Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

• SSHFS

  Possibility to mount remote file system via SSH protocol

• VRF support

  Initial virtual routing and forwarding (VRF) support

• Traffic Management

  Real-time monitoring, wireless signal charts, traffic usage history

• WAN

  1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX

• LAN

  4 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

• Routing

  Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

• Network protocols

  TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN

• VoIP passthrough support

  H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

• Connection monitoring

  Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

• Firewall

  Port forward, traffic rules, custom rules, TTL target customisation

• Firewall status page

  View all your Firewall statistics, rules, and rule counters

• Ports management

  View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

• Network topology

  Visual representation of your network, showing which devices are connected to which other devices

• DHCP

  Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

• QoS / Smart Queue Management (SQM)

  Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

• DDNS

  Supported >25 service providers, others can be configured manually

• DNS over HTTPS

  DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS

• Network backup

  VRRP, Wired options, each of which can be used as an automatic Failover

• Load balancing

  Balance Internet traffic over multiple WAN connections

• Hotspot

  Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

• SSHFS

  Possibility to mount remote file system via SSH protocol

• Traffic Management

  Real-time monitoring, wireless signal charts, traffic usage history

• Ethernet

  8 x ETH ports, 10/100 Mbps, supports auto MDI/MDIX crossover

• IEEE 802.3 series standards

  802.3i, 802.3u, 802.3ab, 802.3x, 802.3az

• PoE ports

  Port 1 - 8

• PoE standards

  802.3af and 802.3at compliant PSE ports, over spare pairs - Mode B

• PoE Max Power per Port (at PSE)

  30 W

• Total PoE Power Budget (at PSE)

  240 W

• Bandwidth (Non-blocking)

  20 Gbps

• Packer buffer

  128 KB

• MAC address table size

  2K entries

• Jumbo frame support

  9216 bytes

• Connector

  2-pin industrial DC power socket

• Input voltage range

  7 – 57 VDC, overvoltage protection: 60Vmax, reverse polarity protection: 80Vmax, surge protection: min 64.4V/max 71.2V breakdown voltage, 93.6V maximum reverse voltage @4.3A maximum reverse surge current, 1- Vin, 2-PGND

• PoE-out input voltage range

  44 – 57 VDC

• Power consumption

  Idle: 1 W / Max: 2 W / PoE Max: 246 W

• Ethernet

  8 x RJ45 ports, 10/100 Mbps

• Status LEDs

  1 x Power LED, 16 x ETH status LEDs

• Power

  1 x 2-pin industrial DC power socket

• Other

  1 x Grounding screw

• Casing material

  Anodized aluminum housing and panels

• Dimensions (W x H x D)

  113.1 x 41.2 x 74.6 mm

• Mounting options

  Integrated DIN rail bracket, wall mount, flat surface (additional kit needed)

• Weight

  280 g

• Operating temperature

  -40 °C to 75 °C

• Operating humidity

  5% to 95% non-condensing

• Ingress Protection Rating

  IP30

IES-1080A is unmanaged Ethernet Switch with 8x10/100Base-T(X) ports and extended operating temperature range from -40℃ to 75℃ for the harsh environments. The enclosure designed with compact size and a robust housing; it can help you to easily installed.

• • Support 8 ports 10/100Base-T(X)

   
  • Support auto-negotiation and auto-MDI/MID-X
   
  • Support Store and forward transmission
   
  • Support flow control
   
  • Provide Relay output
   
  • Compact size for easily installation
   
  • Rigid IP-30 housing design
   
  • DIN-rail and wall mounting enable

IES-C1050 series are unmanaged  Ethernet switches with 5 x 10/100Base-TX ports . In addition, the wide operating temperature range from -40°C to 75°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for Ethernet application.

• • Supports 5 x 10/100Base-TX ports, RJ45 connector
   
  • Compact size for easy installation
   
  • QoS supported to process critical data in heavy traffic
   
  • IP40 protection class
   
  • -40 to 75°C wide operating temperature range
   
  • DIN-Rail mounting enabled

IES-162FX-L series are unmanaged Ethernet switches with 6 x 10/100Base-T(X) and 2 x 100Base-FX ports. With very compact size of housing, you can install IES-162FX-L series easily. In addition, IES-162FX-L series are with rigid IP-30 housing design and can operate under harsh environment. The extended operating temperature range from -20°C to 60°C is ready and can satisfy most requirement of operation.

• • Support 6x10/100Base-T(X) and 2x100Base-FX single/multi-mode fiber ports
   
  • Support auto-negotiation and auto-MDI/MDI-X
   
  • Support store and forward transmission
   
  • Support flow control
   
  • Support broadcast storm protection
   
  • Compact size for easily installation
   
  • Support operating temperature from -20 to 60oC
   
  • Rigid IP-30 housing design
   
  • DIN-Rail and wall mounting enabled

IES-180B is unmanaged Ethernet switch with 8x10/100Base-T(X) ports. With very compact size of housing, you can install IES-180B easily. In addition, IES-180B is with rigid IP-30 housing design and can operate under harsh environment. The extended operating temperature range from -40 to 75°C is ready and can satisfy most requirement of operation.

• • Supports 8 ports 10/100 Base-T(X)
   
  • Supports auto-negotiation and auto-MDI/MDI-X
   
  • Supports store and forward transmission
   
  • Supports flow control
   
  • Compact size for easily installation
   
  • Rigid IP-30 housing design
   
  • DIN-Rail and wall mounting enabled

• Support 8 ports IEEE 802.3at compliant PoE and total power budget is 120W with maximum 30W per port of 24V mode Total power budget is 180Watts with maximum 30Watts per port of IGPS-1082GP model
  • •  
      • Support up to 9.6K Bytes Jumbo Frame
       
      • Support up to 4Mbit Packet buffer
       
      • Support auto-negotiation and auto-MDI/MDI-X
       
      • Support store and forward transmission
       
      • Support flow control
       
      • Provided relay output for power failed warning system
       
      • Provide DIP-switch to setting SFP speed
       
      • Rigid IP-30 housing design
       
      • DIN-Rail and wall mounting enabled

  Industrial 10-port unmanaged Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. and

  Overview

   

   

  IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports.  P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection.  And support wide operating temperature from -40 oC to 75 oC.  Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.

   

   

  Features

   2x100/1000Base-X, SFP socket

   

   

   

IGS-1042GPA is an unmanaged Ethernet switch. IGS-1042GPA has 4x10/100/1000Base-T(X) and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGS-1042GPA supports wide range 12~48VDC power inputs.  The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for Ethernet application.

• • Provide 4x10/100/1000Base-T(X) and 2x100/1000Base-X SFP ports
   
  • Supports Jumbo frame up to 9KBytes
   
  • SFP port support 100Base-FX and 1000Base-X speed
   
  • Support auto-negotiation and auto-MDI/MDI-X
   
  • Support store and forward transmission
   
  • Supports flow control
   
  • Rigid IP-30 housing design
   
  • DIN-Rail and wall mounting enabled

IGS-1050A/IGS-1041GPA series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) and 1 x 1000Base-X SFP ports. IGS-1050A/IGS-1041GPA series support redundant power inputs, rigid IP-30 housing and have DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.

• • Each unit supports 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) and 1 x 1000Base-X SFP ports 
   
  • Support Jumbo Frame up to 9K Bytes 
   
  • Hardware DIP switch to enable/disable warning function 
   
  • Rigid IP-30 slim type housing design 
   
  • DIN-Rail and wall mounting enabled 
   
  • Relay output to carry capacity of 1A at 24 VDC

• ETHERNET

  5 x ETH ports, 10/100 Mbps, supports auto MDI/MDIX crossover

• IEEE 802.3 series standards

  802.3i, 802.3u, 802.3ab, 802.3x, 802.3az

• Bandwidth (Non-blocking)

  10 Gbps

• Packer buffer

  128 KB

• MAC address table size

  2K entries

• Jumbo frame support

  9216 bytes

• Connector

  3-pin industrial DC power socket

• Input voltage range

  7 – 57 VDC, overvoltage protection: 60 Vmax, reverse polarity protection: 80 Vmax,

  surge protection: min 64.4V/max 71.2V breakdown voltage,

  93.6V maximum reverse voltage @4.3A maximum reverse surge current

• Power consumption

  Idle: 1 W / Max: 1.5 W

• Ethernet

  5 x RJ45 ports, 10/100 Mbps

• Status LEDs

  1 x Power LED, 10 x ETH status LEDs

• Power

  1 x 3-pin industrial DC power socket

• Grounding

  Grounding terminal on power connector

• Casing material

  Anodized aluminum housing and panels

• Dimensions (W x H x D)

  113 x 28 x 50 mm

• Weight

  142 g

• Mounting options

  Integrated DIN rail bracket

• Operating temperature

  -40 °C to 75 °C

• Operating humidity

  5% to 95% non-condensing

• Ingress Protection Rating

  IP30

SWM280 PoE+ managed switch

The SWM280 is a powerful L2 managed switch with L3 features for advanced network control. Designed for high-performance connectivity, this 24-port switch combines 12 PoE+ ports, 12 Gigabit Ethernet ports, and 4 SFP ports. The PoE+ supply up to 30 W per port and a total power budget of 300 W. The SWM280 supports PROFINET & other industrial protocols, enabling flexibility over management and power supply.

SWM281 Gigabit Ethernet managed switch

The SWM281 is an L2 managed switch with added L3 functionality, tailored for complex networking scenarios. With 24 Gigabit Ethernet ports and 4 dedicated SFP ports, it delivers high-bandwidth performance and reliable fibre optic communication for large-scale deployments. With support of PROFINET & other industrial protocols, this enterprise-grade 24-port switch ensures smooth integration into automated environments.

IGPS-1411GTP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, 1 additional Gigabit port, and 1x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1411GTP-24V supports wide range 12~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40°C to 75°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

• • IGPS-1411GTP-24V provide 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
   
  • Support P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
   
  • Supports Jumbo frame up to 10KBytes
   
  • SFP port support 100Base-FX and 1000Base-X speed
   
  • Support auto-negotiation and auto-MDI/MDI-X
   
  • Support store and forward transmission
   
  • Support dual wide range 12~57VDC power inputs for power redundancy
   
  • Supports flow control
   
  • Rigid IP-30 housing design
   
  • DIN-Rail and wall mounting enabled

IGS-1050A/IGS-1041GPA series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) and 1 x 1000Base-X SFP ports. IGS-1050A/IGS-1041GPA series support redundant power inputs, rigid IP-30 housing and have DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.

• • Each unit supports 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) and 1 x 1000Base-X SFP ports
  • Support Jumbo Frame up to 9K Bytes
  • Hardware DIP switch to enable/disable warning function
  • Rigid IP-30 slim type housing design
  • DIN-Rail and wall mounting enabled
  • Relay output to carry capacity of 1A at 24 VDC